The Ghost Immobiliser
Immobilisers are a potent weapon in the fight against car theft. They stop the vehicle from starting if it does not have an ignition key fob. They also work well to stop hotwiring and other traditional forms of vehicle theft. Innovative methods like relay theft or key cloning are becoming increasingly common.
The Ghost Immobiliser was designed to counter these new trends and make your car unnoticeable. It's silent and stealthy and does not rely on key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser is a groundbreaking device, connects with the CAN data network of your vehicle in order to stop key cloning and theft. It is a TASSA approved product, and insurance companies endorse it. It is almost undetectable by thieves and operates silently. It uses buttons in your steering wheel, center console and doors to create a unique pin code that must be entered prior to being able to start your car. You can create up to 20 different sequences to improve security. It's easy to install and doesn't require any additional hardware.
It is recommended to use an accredited CAN immobiliser installer that specialises in the specific type of vehicle you have to get the best results. Idealy, they should have a workshop close to you where you can visit to have your installation completed. There is also an array of tools and equipment that can aid you in the installation. They will have basic hand tools, a multimeter and insulation tape, as well as heat shrink tubing to secure the connections. A user's manual will offer specific instructions for your vehicle's wiring.
Before beginning the installation Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. Double-checking the CAN L and H wires is essential, as incorrect identification can result in a faulty integration of the system. It is also a good idea to label or mark the wires. Make use of a multimeter to ensure that the power source is supplying the same 12V.
ghost immobiliser cost can use various strategies to get around Ghost Immobilisers. This includes jamming or spoofing. These techniques work by amplifying signals sent from the key fob to the electronic controller unit. With the latest anti-jamming technology and vigilant monitoring, your vehicle can be protected from these sophisticated attacks.
Increased security
Ghost immobilisers provide an additional layer of security to safeguard your car from theft. It uses a PIN code security system that can be activated by pressing buttons on your dashboard or steering wheel which makes it difficult for thieves to access the device and take your vehicle. The device is designed to be hidden in your vehicle. car stolen with ghost immobiliser has no LEDs, or other signals to alert a potential burglar to its presence. It communicates with your vehicle's ECU through the data bus, meaning it is not susceptible to the same hacking and relay attacks that can disable conventional security systems.
The system is an excellent investment for those who own high-end cars, since they are at a higher risk of being stolen because of their value and their popularity. Its security features are enhanced to protect against key cloning, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers are integrated with apps, meaning you can arm and disarm quickly. They may be equipped with a service/valet option that allows you temporarily deactivate the immobiliser while your vehicle undergoes repairs or maintenance.
Ghost immobilisers also have a excellent feature that it doesn't require any wire cutting. This is an excellent feature, especially if your vehicle is more recent and doesn't have an immobiliser built in. Certain systems also work with GPS tracking devices, adding an extra layer of security to your vehicle. The use of a GPS tracker can also help to reduce your insurance premiums. If you decide to purchase a ghost immobiliser make sure it is TASSA-verified and that a professional installer installs the device for you.
Compatibility with all major makes and models
The Ghost Immobiliser is made to work with all major car models and makes, protecting your precious possessions from theft. It uses buttons in your steering wheel, centre console, or door panels to generate a unique pin code that must be entered before you can drive your vehicle. The system is tamper-proof unbreakable and comes with three-year guarantee. It is also fully accredited by insurance companies, which means that it can lower your premiums.
The Ghost system is different from traditional immobilisers that rely on the key fob for ignition control. It connects directly to the engine controller through the CAN bus. This means it's tamper proof, virtually impossible to remove or disable and cannot be stolen by organised car thief criminal gangs. In addition to this, Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be connected with a secure iPhone application that permits remote monitoring and management.
You can set an PIN code that is easy to remember, yet mathematically, it is impossible for thieves to guess. You can modify and modify the PIN at any time to ensure your vehicle's security, even if it is located in a parking lot or on the street. You can also choose a valet or service mode in case you require someone else to drive your vehicle for a short period such as when it's in garage for maintenance. This feature is also an excellent way to protect your car from being stolen by an unscrupulous mechanic. To ensure your security you can select a Ghost call alert to inform you when your car is in motion or if it's been moved.
Convenience
The ghost immobiliser shields your vehicle from common theft techniques like key cloning or relay attacks. It works by connecting to the vehicle's CAN data network and blocking communication with the engine ECU. This makes it impossible for thieves to copy or hack your car, making the installation of this system a good idea for all drivers.
Once installed, you'll have to enter a PIN of up to 20 digits using the buttons on the dashboard and steering wheel to start the vehicle. The system is completely hidden, and therefore undetectable by thieves. It does not emit radio frequency signals. It is also able to be configured to allow change the PIN of the user, which adds security. The system is also designed to stop circuit cutting and makes it virtually impossible to alter.
Certain systems let you communicate directly with the immobiliser through an app on your smartphone, disarming it immediately if you forget your PIN. Some come with an option for service or valet that allows you to start your vehicle temporarily, for instance, when you have to drop it off for servicing or valet parking.
The Ghost Immobiliser is also undetectable by thieves, as it doesn't transmit radio signals. This is a major benefit over other aftermarket security systems. Additionally, it is easy to use and does not require any complicated wiring. It can be used in combination with dash cams to provide added safety. Dash cams include the Thinkware F70, which features clear and sharp HD 1080p dashcam footage as well as Format Free Technology and parking mode. The system is able to be hardwired to ensure maximum performance and durability.
Installation
It is crucial to select the best immobiliser ghost to protect your car from thieves. This device will help to stop car theft by blocking the communication between your engine controller unit (ECU) and key fobs. This prevents thieves from intercepting the signal and copying the key fob to begin your car. It also can detect the presence of a tamper and alert the vehicle owner.
The device is easy to install and connects to the vehicle's existing systems. It doesn't require any modifications to wiring of the vehicle and can be installed in a hidden location such as under the dashboard. To ensure that the device has been properly installed, follow the instructions in the manual for the user. After installation, it is important to test the system. This will ensure that the ghost of the immobiliser functions as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from a certified installer and have it installed on your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it more difficult for thieves to take over the system or bypass it. The installation process typically takes between 2 and 3 hours.
During the installation process it is recommended that you review the wiring diagram of your vehicle model. This will allow you to locate the CAN High & Low wires. Low wires required to connect your Ghost to the engine of your vehicle. Check all connections to ensure they are safe and well-insulated.
After the installation is completed, you can use the Ghost Immobiliser in normal operation. It will shut off the ignition of your vehicle if it is not able to start it with the correct PIN, which you can enter yourself. The immobiliser ghost cost can also be set to Service/Valet mode for times when you have to surrender your vehicle to service or valet parking.