Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The innovative Ghost immobiliser shields your pride and joy from key-long and relay theft. With a personalised PIN sequence, unless they have the correct code, your car won't start!
Transport Mode allows you to temporarily disable the device, which is great for vehicle transport and servicing. It then reactivates by entering a PIN code again.
There are no Key Fobs or Led Indicators
The Ghost 2 immobiliser offers a effective defense against modern theft methods. Its undetectable installation and engine start blocking can reduce the chance of your vehicle being stolen, which could offer peace of mind and could even reduce insurance premiums.
ghost immobiliser cost doesn't emit radio frequency signals, making it inaccessible to traditional scanners and can't be hacked with common methods, such as key cloning and signal jamming. The device uses existing buttons on your vehicle such as those on the steering wheel, door panels and the center console to generate a unique, changeable PIN code sequence that is up to 20 presses long. Only the vehicle owner is capable of starting the engine when the right sequence or beacon or mobile application is utilized. This adds an extra layer of security against thieves.
You can also activate a convenient service mode for situations such as valet parking and maintenance that require you to temporarily disable the system. The mobile app makes it easy to do this, and ensures that your vehicle is protected when it is being serviced. It is simple to change to secure mode when the job is complete and ensure that your vehicle is protected at all times.
Unlike other aftermarket immobilisers that work with fobs The Ghost 2 can be operated directly via the existing buttons, making it far simpler to use than traditional systems. The app can also act as a spare key in emergency situations, allowing you to drive with the security turned off without entering your PIN code.
No Radio Frequency Signals
Contrary to traditional security systems which come with their own remote The Ghost 2 immobiliser doesn't require any additional key fobs, and can be operated using the buttons on your steering wheel or centre console. It is also unnoticeable by thieves using RF scanning or grabbing technology. This means that your car won't even start for it even if they get your keys.
The device uses an unique password sequence of buttons that locks the engine. The personalised PIN code can be entered via the app or by using the existing buttons on the steering wheel or on the central console. You can also lock the gearbox so that your vehicle isn't able to be driven unless you've got your key or pin code. The device can be set to Transport mode, which allows you to drive the car without having to enter your pin code. This provides additional protection for your vehicle when it is parked in a valet or service park.
The Ghost 2 immobiliser is designed to serve as a deterrent for theft that is as subtle as it can be, making it an attractive choice for those who've spent an enormous amount of money personalizing their cars or own rare or expensive cars. Many people have testified that this is a fantastic way to protect their cars from theft and some have even shared stories of attempted thefts that have been stopped by the device. The Ghost 2 is also very versatile. Customers report that it works both with their regular keys as well as with the emergency button on their car, giving them peace of mind when they're away from their vehicle.
No Radio Frequency Scanners
Ghost immobilisers protect your vehicle from key copying and theft. The system makes use of the buttons inside your vehicle, for example the ones on your steering wheel and dashboard, to create a unique, changeable button sequence that only you can identify. Without this sequence, your car will not start. This unique combination of a disarming sequence as well as the absence of radio frequency signals makes the device extremely difficult to attack or bypass.
The Ghost CAN Immobiliser is a safer alternative to devices that are approved by Thatcham that rely on radio frequency scanning. It works silently without external signals and doesn't rely on any external signals. It's a safer option, and it can be insured if installed by an installer who is TASSA-approved (we are one of them!) ).
Because of of how the Ghost immobiliser integrates with your vehicle, it is recommended that an experienced installer perform its installation. This will ensure that it is completely integrated into your vehicle's system, leading to optimal performance and less risk of malfunction.
Additionally, professional installation often includes warranties and support that further increase the value of your investment. This is a major deterrent to would-be thieves who are less likely than before to try and bypass the device due to its extensive security features.
In addition to being an excellent deterrent against thieves As well as a great deterrent to thieves, in addition to being a great deterrent for thieves, Ghost is designed to be a user-friendly device too. It can be set to automatically re-arm itself after a specific amount of time, so you don't need to remember your PIN every time you park your vehicle. It offers a Service/Valet mode when you need to leave your car for valet parking or for servicing. This can be turned on and turned off using an easy indicator sequence.
No Wire Cutting
The Ghost 2 does not require cutting any wires in your car during installation, ensuring non-invasive integration with the original systems of your vehicle. It connects to the CAN data network of your vehicle, and is programmed with a unique PIN. This will prevent anyone else from starting the engine if they don't have a specific sequence of PINs or an app authorisation.
It is also unnoticeable by the specialised scanning tools that some thieves use, and it is quiet because it doesn't emit radio signals like other immobilisers. It is weatherproof, sealed, and small enough to be concealed anywhere within the vehicle.
Another advantage of the Ghost II is that it can be switched to "transport mode" for short intervals without needing an individual PIN sequence. This is great for situations like lending the vehicle to a friend or family member or in emergencies, allowing you to start your car and leave quickly and safely.
It is essential to work in a well-lit area when installing the Ghost II. You should also wear safety gear while working with electrical components and tools. A basic set of hand tools will enable you to create precise connections, and a multimeter can be used to verify electrical values and ensure your wiring is safe. Cable ties and insulation tape can be used to secure or rejoin any cut or exposed wires that are exposed during the installation process.
It's also vital to disconnect the battery before attempting any wiring work on your vehicle. This will stop any airbag deployments that happen accidentally or electrical shocks from happening when the battery is accidentally disconnected when the Ghost II is still connected to the system of your vehicle.
Easy to Install
ghost immobiliser cost , an exclusive device of the next generation, works by connecting directly to your vehicle's CAN Data Network. It utilizes a unique pin code to prevent it from beginning. This makes it far harder to break than standard alarm systems or after market key fobs, and provides superior security against key cloning hacking and relay attacks.
The device can be hidden in your vehicle, and it makes use of the buttons on your dashboard and steering wheel to create a unique sequence that you can only recognize. This stops thieves from using a stolen car key to start it and also stops them from using the diagnostic tool that thrives on hacking OBD.
Installation is simple and does not require cutting wires. The unit is connected to the vehicle's CAN bus system through identified constant 12V supply and a ground connection. Basic hand tools are sufficient for the installation process and a multimeter will assist with pinpointing the correct wires. Insulation tape or heat shrink tubing is recommended to safeguard the connections and cable ties can be utilized to keep the wiring tidy and tidy.
Once it is installed, the device is put into a learning mode that captures your specific buttons or sequences in order to create your own unique pin code. The information is then stored in the CAN network which makes it nearly impossible for anyone to duplicate your sequence and start your vehicle.
Transport Mode is a function that can be used in an emergency if you forget your PIN number, sell your vehicle or the button stops working. This will shut down the Ghost system completely, but will be activated automatically once you reach 31mph for more than 15 minutes or you enter your PIN Code. This is perfect for those who rent their cars frequently through services like Turo or ZipCar.